Technical Specifications

System Performance

Frequency Response (-3 dB) * 65 Hz – 18 kHz
Frequency Range (-10 dB) 52 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: Dependent upon number of elements and line source curvature
Recommended Crossover Frequency 1.2 kHz (acoustic, active, external DSP)
RMS handling capacity ** LF: 400W
HF: 150W
Maximum SPL @ 1 Meter *** 132 dB ([WorxAudio] preset)

Transducers

Components LF: 8” (203.2 mm) x 2; 2” (50.8 mm) voice coil
HF: 1.4” Exit (35.56 mm) x 1; 3” (76.2 mm) voice coil
Nominal Impedance LF = 4 ohms, HF = 8 ohms, self-powered
LF = 4 ohms, HF = 8 ohms, biamped

Physical

Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or Dante
Suspension/Mounting TrueAim® Tour side rigging; optional array frame accessories
Dimensions 10.25” H x 24.5” W x 18” D (260.35 mm x 622.3 mm x 457.2 mm)
Net Weight 64 lb. (29.02 kg)
Shipping Weight 70 lb. (31.75 kg) - approximate with carton
Product Versions XL1i-Biamp-Powered, XL1T-Biamp-Powered
Digital Power Amp 500W (x1) LF, 500W (x1) HF
Digital program processing
XLR I/O-DANTE enabled
AC powerCON I/O

Footnotes

* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.
XL1T_-_DIMS

Overview