CM 12A

The CM 12a enclosure contains a 1.4’’ diaphragm compression driver loaded into a coaxial configuration with a 12’’ low frequency transducer. Compact and lightweight, this model produces 70° x 50° directivity pattern.

KG100HFX 2.0

Made in Baltic birch plywood, CM cabinets have 35° angle wedge from vertical. The CM can also be pole mounted using a tiltable flange of +/- 13.5° with 4.5 steps.

The‘’VERS’’ system permits to rotate the speaker to change the sound projection directivity in a few seconds.

Coupling between traditional horns occurs a lot of comb effects resulting in poor sound projection and coherence in the space due to bad coupling between cabinets.

Thanks to the specific DSP treatment, comb effects are limited to ensure a good coupling between CM-a cabinets for FOH use. We call that ‘’X-comb’’ technology.

Key Features

  • Coaxially constructed
  • 2-way self-powered stage monitor
  • Adaptive (rotable) AF horn 70×50° and 80×60°
  • X-comb technology inside
  • Pole mount socket
  • Ultra compact wedge with a cut-off of LF


Tech Specs

Usable bandwith (-6dB) 65 Hz-20 kHz ([Extended] preset)
Maximum SPL Peak / 1m 135.3 dB (1)
Coverage directivity (-6dB) 70° x 50°, ”VERS” rotating system (2)
Transducers LF: 1 x 12″, neodymium, weather resistant,
HF: 1 x 1,4″,neodymium, diaphragm compression driver
Input impedance 10 kΩ balanced
RMS power handling 1000 W (3)
Wedge angle 35° from vertical
Connectors Balanced 1 x IN, 1x OUT Neutrik© XLR 1 x IN, 1 x OUT Neutrik© Powercon
Dimensions (H x W x D) 335 x 460 x 460 mm (incl. feet)
Weight 19 kg / 44 lb
Cabinet Baltic birch plywood
Finish High resistant Polyurea coating
Front Steel removable grill on magnets
Mounting accessories tiltable flange (+/- 13,5°, 4,5° step) + M8 nuts