Technical Specifications
Acoustic Performance
|
| Configuration |
2-way biamped |
| Frequency Response (-3 dB) |
55 Hz – 18 kHz |
| Frequency Response (-10 dB) |
50 Hz – 20 kHz |
| Nominal Coverage (-6 dB) |
110° x 50° |
| Maximum Peak SPL |
135 dB |
| Crossover Frequency |
1.6 kHz |
Transducer
|
| LF Transducer |
1×12″ Ferrite |
| Voice Coil Diameter |
2.5” |
| HF Transducer |
1.75″ compression driver |
Amplifier
|
| Type |
Class D |
| Total Power Output |
1,300W Peak (650 RMS) |
| LF Power |
1,000W Peak (500W RMS) |
| HF Power |
300W Peak (150W RMS) |
| Cooling |
Free air convection |
| Rated THD |
<0.05% (20 Hz – 20 kHz) |
| Dynamic Range |
119 dB (A-weighted) |
| Bandwidth |
20 Hz – 20 kHz |
Connections and Controls
|
| Input Channels |
1 mic/line, 1 line |
| Input Connector Types |
2 combo |
| Mic Input Impedance |
1 kΩ |
| Line Input Impedance |
10 kΩ |
| Maximum Input |
+22 dBu |
| Output Connector |
2 XLR (M): Mix out, Direct out |
| Controls |
Mic/Line Level
Line/Level
Preset Select
HPF On/Off
Front LED On/Off |
| Indicators |
DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal |
DSP
|
| Presets |
FOH, MON, DJ |
| Polarity |
— |
| HPF |
100 Hz, 4th-order Linkwitz-Riley |
| Bit Depth |
24-bit |
| Sample Rate |
96 kHz |
Enclosure
|
| Material |
Eucalyptus Plywood |
| Finish |
Chemline™ polyurethane |
| Grille |
Powder-coated steel |
| Dimensions (HxDxW) |
25.25” x 14” x 13.9” (641 mm x 356 mm x 353 mm) |
| Unit Weight |
52 lbs. (23.6 kg) |
| Handles |
2 (Top and Side) |
| Monitor Angle |
30° |
Safety
|
| Amplifier Protection |
Over-current, DC, over/under-voltage, over-temperature, high frequency |
| Transducer Protection |
limiter |
Power
|
| AC Power Input |
100-230V~, 50-60 Hz |
| AC Power Consumption (1/8 Power) |
150W |
Suspension Mounting
|
| Rigging Points |
12 M10 |
| Mounting |
35 mm, 2-position |
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
Overview
Overview