Technical Specifications
Acoustic Performance
|
|
| Configuration |
Powered subwoofer, ported |
| Frequency Response (-3 dB) |
45 Hz – 250 Hz |
| Maximum Peak SPL |
135 dB |
| Crossover Frequency |
90 Hz |
Transducer
|
|
| LF Transducer |
1×18″ Ferrite |
| Voice Coil Diameter |
4″ |
Amplifier
|
| Type |
Class D |
| Total Power Output |
2,000W Peak (1,000 RMS) |
| LF Power |
2 x 500W bridged (1000W total) |
| Cooling |
Free air convection |
| Rated THD |
<0.05% (20 Hz – 20 kHz) |
| Dynamic Range |
119 dB (A-weighted) |
| Bandwidth |
20 Hz – 20 kHz |
Connections and Controls
|
| Input Channels |
2 line |
| Input Connector Types |
2 combo |
| Line Input Impedance |
10 kΩ |
| Maximum Input |
+22 dBu |
| Output Connector |
2 XLR (M): Mix out, Direct out |
| Controls |
Output Level
Low Pass Filter
Preset Select
Polarity Invert On/Off
Mono On/Off
Front LED On/Off |
| Indicators |
DSP Preset, Polarity Invert On/Off, Mono On/Off, Front LED On/Off, Signal, Clip, Thermal |
DSP
|
| Presets |
Extended LF |
| Polarity |
Normal or Reverse |
| Bit Depth |
24-bit |
| Sample Rate |
96 kHz |
Enclosure
|
| Material |
Eucalyptus Plywood |
| Finish |
Chemline™ polyurethane |
| Grille |
Powder-coated steel |
| Dimensions (HxDxW) |
22.5” x 25” x 24.5” (572 mm x 635 mm x 622 mm) |
| Unit Weight |
95 lbs. (43 kg) |
| Handles |
2 (One on each side) |
Safety
|
| Amplifier Protection |
Over-current, DC, over/under-voltage, over-temperature, high frequency |
| Transducer Protection |
limiter |
Power
|
| AC Power Input |
100-230V~, 50-60 Hz |
| AC Power Consumption (1/8 Power) |
150W |
Suspension Mounting
|
| Rigging Points |
12 M10 |
| Mounting |
Ground stack provisions |
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
Overview
Overview