Technical Specifications
Acoustic Performance
|
|
Configuration |
Active Subwoofer |
Frequency Response (-3 dB) |
42 Hz – 150 Hz (Variable) |
Frequency Response (-10 dB) |
36 Hz – 144 Hz |
Maximum Peak SPL |
135 dB |
Crossover Frequency |
90 Hz |
Transducer
|
|
LF Transducer |
1×18″ Ferrite magnet |
Voice Coil Diameter |
4″ |
Amplifier
|
|
Type |
Class D |
Total Power Output |
2000W Peak, 1000W Program (500W RMS) |
LF Power |
2000W Peak, 1000W Program (500W RMS) |
Cooling |
Free air convection |
Rated THD |
<0.05% (20 Hz – 20 kHz) |
Dynamic Range |
119 dB (A-weighted) |
Bandwidth |
20 Hz – 20 kHz |
Connections and Controls
|
|
Input Channels |
1 Line |
Input Connector Types |
(XLR) |
Line Input Impedance |
40 kΩ |
Maximum Input |
+4 dBu |
Output Connector |
1 XLR, Direct out |
Controls |
Preset Select, Polarity Invert |
Indicators |
Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status |
DSP
|
|
Effects |
Compression, Polarity Invert, Limiting, Delay, 8-band EQ and preset selection via WorxControl |
Bit Depth |
24-bit |
Sample Rate |
48 kHz |
Enclosure
|
|
Material |
15 mm Eucalyptus plywood |
Finish |
Chemline™ Polyurea |
Grille |
Powder-coated steel |
Dimensions (HxWxD) |
23.2” x 20.8” x 24” (590 mm x 529 mm x 610 mm) |
Unit Weight |
105 lbs. (47.6 kg) |
Handles |
2 (One on each side) |
Safety
|
|
Amplifier Protection |
Over-current, DC, over/under-voltage, over-temperature, high frequency |
Transducer Protection |
Limiter |
Power
|
|
AC Power Input |
90-260V~, 50-60 Hz |
AC Power Consumption (1/8 Power) |
4.2 Amps |
Suspension Mounting
|
|
Rigging Points |
M20 Threaded pole receiver, Integrated rigging (10:1 load) |
Optional Accessories
|
|
Rigging |
CDL Rigging Grid, CDL Rigging Extension Bar, CDL Rigging Sling |
Other |
ULT18-CSTR 4” Caster Kit, CDL18s-Cover Dust Cover |
As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
Overview
Overview