Technical Specifications

System Performance

Frequency Response (-3 dB) * 58 Hz – 18 kHz
Frequency Range (-10 dB) 48 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: 20°
Recommended Crossover Frequency 1.2 kHz (acoustic, active, external DSP)
RMS handling capacity ** LF: 800W
HF: 300W
Maximum SPL @ 1 Meter *** 136 dB ([WorxAudio] preset)

Transducers

Components LF: 8” (203.2 mm) x 4, 2” (50.8 mm) voice coil
HF: 1.4” Exit (35.56 mm) x 2, 3” (76.2 mm) voice coil
Nominal Impedance LF = 4 ohms, HF = 8 ohms, self-powered
LF = 4 ohms, HF = 8 ohms, biamped x (2) modules

Physical

Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or Dante
Suspension/Mounting Internal bracket w/ threaded 0.375” flying points (x17)
Dimensions 21.375” H x 24.5” W x 18” D (542.92 mm x 622.3 mm x 457.2 mm)
Net Weight 119 lb. (53.97 kg)
Shipping Weight 125 lb. (56.69 kg) – approximate with carton
Product Versions XL2i-Biamp, XL2i-Powered
Digital Power Amp 500W (x2) LF, 500W (x2) HF
Digital program processing
XLR I/O-DANTE option
AC powerCON I/O”

Footnotes

* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.

X2i_-_DIMS

Overview


Overview