Technical Specifications

System Performance

Frequency Response (-3 dB) * 55 Hz – 18 kHz
Frequency Range (-10 dB) 45 Hz – 20 kHz
Recommended High-Pass 50 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: 40°
Recommended Crossover Frequency 1.2 kHz (acoustic, active, external DSP)
RMS handling capacity ** LF: 2000W
HF: 750W
Maximum SPL @ 1 Meter *** 147 dB ([WorxAudio] preset)

Transducers

Components LF: 8” (203.2 mm) x 10, 2” (50.8 mm) voice coil
HF: 1.4” Exit (35.56 mm) x 2, 3” (76.2 mm) voice coil
Nominal Impedance LF = 5.2 ohms, HF = 3.2 ohms, self-powered
LF = 4 ohms, HF = 8 ohms, biamped x (5) modules

Physical

Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or Dante
Suspension/Mounting Internal bracket w/ threaded .375” Flying points (x17)
Dimensions 48.75” H x 24.5” W x 18” D (542.92 mm x 622.3 mm x 457.2 mm)
Net Weight 275 lb. (124.73 kg)
Shipping Weight 290 lb. (131.54 kg) – approximate with carton
Product Versions XL5i-Biamp, XL5i-Powered
Digital Power Amp PXD-2580
2500W (x1) LF, 800W (x1) HF
Digital (100) program processing, LCD readout
XLR Transformer Isolated I/O
AC powerCON I/O

Footnotes

* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.

X5i-_DIMS

Overview


Overview